Master Contact Adhesive 500ml

SUITABLE APPLICATION

Wood, steel, MDF, particle board, aluminium, plasterboard, natural and synthetic rubbers, plastic laminates, polyurethane foam, boat and automotive interior where laminating or upholstery trimming work is required.

SURFACE PREPARATION

Mix thoroughly before use. Surfaces must be clean, dry and free from oil, dust and other foreign materials. Clean unpainted metals and rubbers with Master Wax & Grease Remover before applying adhesive.

APPLICATION

Apply an even coat of adhesive to both surfaces, covering at least 80% on each surface. Highly porous surfaces may require 2 coats allowing the first coat to tack off before applying the next.

Allow the adhesive to dry for 10-15 minutes or until the surface can be touched without any adhesive transfer.

LIMITATIONS

Do not use on cooper or highly reactive metals
Do not use on expanded polystyrene foam
Not suitable for polyethylene or polypropylene plastic
Unsuitable for unbacked PVC, leather or vinyls. May cause staining on light coloured PVC/Vinyl stock.





COLOUR





Clear