Troton UBS Stone Guard 1LT - 3 Colors Available

SKU:

Sign in to see price.

This product is designed to protect car bodies from gasoline, oil, water and salt. 1Lt to use with A206 spray gun.

Product based on synthetic resins designed to protect the car body against the harmful effects of gasoline, oil, water and salt. Creates a strong, flexible layer for maximum stone chip protection. Features sound-absorbing and soundproofing properties. It does not contain asphalts and bitumen. Can be over coated with any acrylic varnish.

Substrates: The product has very good adhesion to various substrates. It can be applied over:

Polyester laminates,
Poyester putties,
Epoxy primers,
2K acrylic primers,
Steel substrates,
Stainless steel substrates,
Aluminum substrates,
Zinc coated substrates,
Wash primers,
Plastic.

In the case of plastic, it is recommended to heat the element at 50 ° C before application of te UBS antigravel. This will facilitate the removal of silicone from the plastic surface.

Good surface preparation is essential to achieve the best repair results. Polyester laminates should be degreased, dry sanded (P80-P120) and degreased again.

- Polyester putties should be dry sanded (P120).
- Primers should be degreased, dry sanded (P220-P280) and degreased again.
- Steel surfaces should be degreased, dry sanded (P80-P120) and degreased again.
- Stainless steel should be degreased.
- Aluminium and zinc surfaces should be degreased, dulled with the abrasive cloth and degreased again.
- Old coatings should be degreased, dry sanded (P220-P280) and degreased again.
- Plastic surfaces should be washed with detergent, dulled with abrasive cloth and degreased.
- It is recommended to heat plastic panels to 50°C, which helps to remove silicone from the surface.

Use:


Shake before use! Apply 2 or 3 layers with interval of 5-10 minutes between each layer. If applied directly on steel, it is recommended to apply top coat or enamel first.

- Spray gun parameters: nozzle 4mm; pressure 2-4 bar
- Layer thickness: about 100μm for each layer
- Drying time: 40-60 minutes at 20°C.
- Over Coating: clear coat can be applied 1 hour after the last layer has been applied.

Caution: To maintain safety, always follow the instructions given in the Safety Data Sheet for the product.

Carton quantity 12.

T1985 - TROTON UBS STONE GUARD - WHITE 1LT (Thinner Viscosity).
T1986 - TROTON UBS STONE GUARD - BLACK 1LT (Thinner Viscosity).
T1987 - TROTON UBS STONE GUARD - GREY 1LT (Thinner Viscosity).